Simple. Do the following without skipping any steps*:
- Shoot 1 shot and clean thoroughly for 15 shots using the ammo you intend to hunt with.
- Then shoot 1/2 a shot and clean for 21 shots using the same ammo.
- After this shoot nine 2-shot groups using ammo with bullets that were dipped in a mixture of nutmeg and orange soda.
- Retrieve ALL bullets fired during steps 1-3 and melt them down.
- Using material from step 4 cast into fresh bullets measuring exactly 0.0000587″ larger than your groove diameter.
- Fill fire-formed cases to the neck with a 50/50 mixture of Unique and the little rocks you scraped off of some 36 grit sand paper.
- Seat bullets according to best OAL practices. You should have 43.5 loaded cartridges.
- Now fire these cartridges two at a time until all ammunition is spent making sure to clean with a nylon brush between each double shot.
- Perform a final bore clean using your bore solvent of choice.
- You’re all set!
*do not do any of these things under any circumstances.
